Pharmaceutical intermediates & contract manufacturing · MIDC Chincholi, Solapurmaxtouchpharmachemicals@hotmail.com

Manufacturing process

How our batch manufacturing process works

Pharmaceutical intermediates are made in batches. Each batch follows a written batch record through six stages, from raw-material receipt to dispatch.

Process at a glance

One batch, start to finish

  1. Raw material
  2. Reaction
  3. Filtration
  4. Drying
  5. QC & dispatch

Mother liquor and dryer vapours go to distillation; recovered solvent returns to the reactor.

How a batch moves through our plant: reaction, filtration, drying, solvent recovery, quality check and dispatch (56 s).

Illustrative animation of our process. Real plant footage can replace it in assets/video/ without code changes.

Stage 01

Raw-material receipt & dispensing

Incoming raw materials and solvents are identified against the purchase order, labelled with their status and sampled. Only released material is weighed and dispensed for the batch.

Key controls

  • Identity and quantity checked on receipt
  • Quarantine until released
  • Weighed on a 2,000 kg platform scale
Batch Chemical Manufacturing Process: Reactor to Dispatch | Max Touch Raw-material charging Temperature & pressuresensors Graphitecondenser Receiver Steam / hot waterinto jacket Cooling To filtration Agitator drive

Stage 02

Reaction in jacketed batch reactors

Raw materials and solvents are charged into the reactor in the sequence set by the batch record. The agitator keeps the mass uniform while steam or hot water in the jacket heats it, and cooling water or brine removes heat. Vapours pass through graphite condensers and are returned as reflux or collected in a receiver.

Key controls

  • Charging sequence, temperature, time and pressure recorded
  • Reflux or distillation through graphite condensers
  • Off-gases routed to PP/FRP scrubbers

Equipment: Glass-lined reactors for acidic and corrosive media; SS316 reactor for solvent-based reactions

Batch Chemical Manufacturing Process: Reactor to Dispatch | Max Touch Vacuumsystem Slurry from reactor Solvent wash Wet cake Filter cloth & plate Mother liquorto solvent recovery

Stage 03

Filtration & separation

The reaction mass is transferred to a Nutsche filter. Vacuum pulls the liquid (mother liquor) through the filter cloth and leaves a wet cake of product, which is washed with fresh solvent to remove impurities.

Key controls

  • Cake washed to the batch-record specification
  • Mother liquor collected in vacuum receivers
  • Mother liquor sent for solvent recovery

Equipment: Nutsche filtration under vacuum; PP/FRP vacuum receivers

Batch Chemical Manufacturing Process: Reactor to Dispatch | Max Touch Vapours tocondenser Vacuum Hot water / steamto heated shelves Wet cake on trays Dried to the agreed moisture / LOD

Stage 04

Drying

The wet cake is dried on heated shelves under vacuum, which lets solvents and water evaporate at lower temperatures and protects heat-sensitive products. Drying continues until the product meets the agreed moisture or loss-on-drying (LOD) limit.

Key controls

  • Temperature and vacuum controlled
  • LOD / moisture checked before unloading
  • Evaporated solvent condensed and collected
Batch Chemical Manufacturing Process: Reactor to Dispatch | Max Touch Steam toreboiler Condenser Reflux Recoveredsolvent Vacuum Structured packingseparates solvent Mother liquor feed

Stage 05

Distillation & solvent recovery

Solvents from filtration and drying are recovered in a packed distillation column. A thermosyphon reboiler boils the feed, the structured packing separates the components, and the overhead vapour is condensed. Part is returned as reflux; the rest is collected as recovered solvent for reuse.

Key controls

  • Recovered solvent tested before reuse
  • Reduces raw-material cost and effluent load
  • Vacuum operation for heat-sensitive streams

Equipment: Structured-packing column, 400 mm ID; SS316 thermosyphon reboiler

Batch Chemical Manufacturing Process: Reactor to Dispatch | Max Touch Batch sample testedagainst specification Certificateof analysis Packed, labelled,dispatched Batch records and COA travel with every dispatch

Stage 06

Quality check, packing & dispatch

A sample from every batch is tested against the agreed specification. Released product is packed in clean, labelled containers and dispatched with its certificate of analysis and batch details.

Key controls

  • Testing against the customer's specification
  • Certificate of analysis with every dispatch
  • Batch-number traceability from raw material to dispatch

Why batch manufacturing

Flexible plants for multi-step chemistry

Most pharmaceutical intermediates need several reaction and work-up steps, different solvents and tight control of temperature and time. Batch reactors let one plant make many products: the same vessels are cleaned and set up for each campaign, and every batch is recorded so it can be traced and repeated.

Want to see if your process fits our plant?

Share a route outline or product specification. We will check it against our reactors, filtration, drying and distillation equipment.

Enquire